ENGINE OIL — Plus-50™ II API CK-4/SN

The best John Deere oil, Plus-50 II SAE 15W-40, 10W-30, and 0W-40, is made with a unique additive system that offers excellent protection from deposits and wear. It exceeds API service classification CK-4/SN, and is available in sizes from quarts to totes. It’s excellent for all diesel engines!

Part No.	Description	Size
TY26674	Plus-50 II, 15W-40	1 U.S. qt. (946 ml)
TY26673	Plus-50 II, 15W-40	1 U.S. gal. (3.78 L)
TY26675	Plus-50 II, 15W-40	2¹⁄2 U.S. gal. (9.5 L)
TY26679	Plus-50 II, 15W-40	5 U.S. gal. (18.9 L)
TY26677	Plus-50 II, 15W-40	30 U.S. gal. (113 L)
TY26678	Plus-50 II, 15W-40	55 U.S. gal. (208 L)
TY26991	Plus-50 II, 15W-40	275 U.S. gal. tote
TY26669	Plus-50 II, 10W-30	1 U.S. qt. (946 ml)
TY26668	Plus-50 II, 10W-30	1 U.S. gal. (3.78 L)
TY26671	Plus-50 II, 10W-30	5 U.S. gal. (18.9 L)
TY26670	Plus-50 II, 10W-30	55 U.S. gal. (208 L)
TY26863	Plus-50 II, 10W-30	330 U.S. gal. (1250 L) tote
TY26665	Plus-50 II Synthetic, 0W-40	1 U.S. qt. (946 ml)
TY26664	Plus-50 II Synthetic, 0W-40	1 U.S. gal. (3.78 L)
TY26667	Plus-50 II Synthetic, 0W-40	5 U.S. gal. (18.9 L)
TY26666	Plus-50 II Synthetic, 0W-40	55 U.S. gal. (208 L)
TY27354	Plus-50 II Synthetic, 0W-40	275 U.S. gal. tote

HYDRAULIC OIL — Hydrau™, Hydrau™ XR, and Hitachi Super EX-46HN

Hydrau, Hydrau XR, and Hitachi Super EX-46HN are premium hydraulic oils specifically designed for use in hydraulic and hydrostatic systems of construction and forestry equipment.

• Hydrau offers all-season capability in ambient temperatures of –25 deg. C to +50 deg. C (–13 deg. F to +122 deg. F)
• Hydrau XR is a synthetic hydraulic oil that offers all-season capability in ambient temperatures of –40 deg. C to +40 deg. C (–40 deg. F to +104 deg. F)
• Both provide superior oxidation and thermal stability and protect against rust and corrosion
• Extended change intervals
• Hitachi Super EX-46HN is recommended for use in John Deere and Hitachi excavators

ANTIFREEZE/COOLANT

Cool-Gard™ II high-performance, long-life, heavy-duty formula

• Formulated for up to 6-year/6,000-hour* life in cooling systems of diesel and gas engines
• Nitrite-free
• Supports advanced engine technology
• Protects against corrosion and deposits
• Extends water-pump life and prevents liner cavitation

Cool-Gard II PG

• Less toxic to animals and wildlife than conventional ethylene glycol-based coolants

Cool-Gard II Strips

Be confident your cooling system isn’t contaminated or diluted. Use Cool-Gard II test strips to test your coolant every year. Cool-Gard II test strips test the freeze point, pH, and cavitation/ corrosion-inhibitor levels. They also tell you if your cooling system needs the extra protection of Cool-Gard II Extender.

Cool-Gard II Extender

Cool-Gard II Extender replenishes the level of protective additives in Cool-Gard II systems due to over-dilution from water or alternate fluids. Using Cool-Gard II test strips, and Cool-Gard II Extender if needed, will protect your equipment for the long haul.

Coolant Test Kit

Protecting engines from liner cavitation and rust is as important as checking their oil condition. The Coolant Test Kit will provide details to indicate if the fluid is protecting the engine.

GREASE

Choose from these grease types to meet your specific needs:

Multi-purpose grease types:

BEST

Multi-Purpose SD Polyurea Grease and Extreme-Duty Synthetic Grease: For high temperatures and extreme pressures. Best used for U-joints, bearings, and other grease points requiring severe-duty grease.

BETTER

Multi-Purpose HD Lithium Complex: Use for bearings, U-joints, and other grease points requiring heavy-duty grease where a lithium or lithium complex grease is recommended. Special-purpose grease types:

BEST

Calcium Sulfonate 5% Moly Grease: For high temperature and extreme pressure, protects against corrosion, and stays in place in wet conditions. For use in pins, bushings, and heavy-duty shock loads or continuous sliding contact. Moly grease is not recommended for bearing applications. BETTER HD 3% Moly Grease: For those special applications including construction, mining, and heavy industrial equipment. For use in pins, bushings, and ball joints, and shock load and continuous sliding contact.